落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高直流电压小直流电压测试仪(耐电弧放电测试仪)-(确定机把控好)

High voltage low current tester (arc resistance tester) - (computer control)

品牌简称:耐电弧试验机

Product name: electric arc resistance tester

产品的主要参数:NDH-A

Product model: NDH - A

提供标准化:GB/T 1411-2002《膏状隔热产品耐高压得过低功率脉冲蓄电池放电的实验》(共同IEC  61621-1997)及ASTM D495等标准的的的标准制定创造的,并非常符合IEC 149、UL 746A等经过多次实验发现工艺

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重点采用区间及特点:

本疲劳试验箱是安装软件于调速电机、电热器设备和家庭用的电热器设备等相关行业的焊工用塑、聚酯树脂胶胶和耐压漆等耐压的原装修材料的耐脉冲性综合评价,主适用固态垃圾耐压的原装修材料如:塑、pet薄膜、聚酯树脂胶、黑云母、瓷质、夹丝玻璃、耐压油、耐压漆、厚纸板等物质的耐脉冲性测试方法;

本可靠性材料试验机由折算机把控加载,是可以表明如今研究所形态及研究所日期,研究所完结后并保存图片如今研究所数据信息,并可打印图片.标准研究报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为前后合一节构,下端为操作的程序,上侧为检验箱。

2 本物料进行*新智慧操控科技,进行的选择源程序(IEC或ASTM)可会自动做好试验报告,并在笔记本手机上表示实验室检测期间和然而。

3 **安全性能健康,抗不干扰业务能力强,自测准确程度高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断时间间隔差值:低于 ±10ms

2 调压器数量:2kVA

3 电机额定功率检验直流电压:12.5kV

4 耐压试验电流值误差:±3%

5 电压把握的精密度:±10%  直流电测量方法精准度:1.5%

6 电级对试件材料负荷:(0.5±0.05)N

7 电极片原材料:钨棒

8 工业长距离:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 安全使用情况室温:(23±2)℃

10 应用环境室内湿度:(50±5)%

11 外接电源:220V±5%  50Hz  10A

12 试验报告    的方法:   执行标准/美标/10 mA 间断/20 mA 维持/30 mA累计/40 mA重复

13 耐压编译程序以下几点:

流程段

脉冲电流值

mA

焊弧通断日子s

各程序流程图段不间断时间间隔s

实验室检测总的时间s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

连着通

60

240

5

20

连续式通

60

300

6

30

重复通

60

360

7

40

陆续通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

编号

名稱

数

微信备注名

01

耐脉冲测试软件仪

一个

 

02

电级系统软件

几套

 

03

电级支架

一种

 

04

电源模块电缆电线

整套

 

05

与地面放**

一枝

 

06

直流电毫安表

这台

 

07

PC测控小软件

一系列

 

08

试件材料架

一瓶

 

09

电极材料距标准单位块

2块

 

10

偏角规格块

2块

 

11

瓷质片

2片

 

12

喷墨直接各种打印机

1台

国产品牌

13

计算公式机

1台

品牌标志

14

食用反映书

1份

 

15

完成证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 新产品技术参数:

NDH-A    耐弧光冲击试验仪-微机调整

NDH-B    耐电孤校正仪-液晶屏屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪