- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
塑料表观密度测试仪
-
普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高电压值小工作电流实验室检测仪(耐焊弧实验室检测仪)-(算机控制)
High voltage low current tester (arc resistance tester) - (computer control)
服务英文名称:耐电弧试验机
Product name: electric arc resistance tester
设备类型:NDH-A
Product model: NDH - A
拥有标淮:GB/T 1411-2002《混合物电绝缘的材料耐高偏低交流电弧光释放的测试》(等一起IEC 61621-1997)及ASTM D495等原则的需求构思打造的,并合适IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
重要适用性区域及职能:
本试验台机是遵照技术应应用在电机马达、电热器和家居用水量热器等这个行业的安装电工用塑胶制品、树酯胶和隔热带层带漆等隔热带层带用料的耐脉冲使用能力考评,主应用在固体颗粒隔热带层带用料如:塑胶制品、膜、树酯、黑云母、瓷器、钢化玻璃、隔热带层带油、隔热带层带漆、纸壳等物料的耐脉冲使用能力测评;
本做研究性性的时候机由算起机操作启动,能否界面显示所选研究性性睡眠状态及研究性性期限,研究性性完后并储存所选研究性性数剧,并可网页打印.的标准实验设计行业报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 远程服务器为横竖一起结构的,中下部为操控设备,上半部为做实验的时候箱。
2 本设备进行*新智力操作技术应用,进行选泽过程(IEC或ASTM)可主动完成试验装置,并在笔记本上彰显疲劳试验的过程 和数据。
3 **使用性能保持良好,抗影响程度强,检测精密度较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 弧光通断時间误差率:小于等于 ±10ms
2 调压器功率:2kVA
3 額定试验检测的电压:12.5kV
4 实验交流电压精密度:±3%
5 直流电压操纵误差:±10% 工作电流自动测量控制精度:1.5%
6 电极片对试件压:(0.5±0.05)N
7 参比电极的原材料:钨棒
8 电极片时间:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 实用工作环境室内温度:(23±2)℃
10 利用周围环境对室内温度的:(50±5)%
11 电源开关:220V±5% 50Hz
12 试验报告 技巧: 国家标准下载/美标/10 mA 连继/20 mA 间断性/30 mA反复/40 mA多次
13 耐压试验系统如下所述:
| 环节段 | 电弧焊接电流大小 mA | 焊弧通断时期s | 各执行程序段不间断用时s | 应力测试总日子s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 持续通 | 60 | 240 | |
| 5 | 20 | 连续性通 | 60 | 300 | |
| 6 | 30 | 间隔通 | 60 | 360 | |
| 7 | 40 | 陆续通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序列号 | 名号 | 數量 | 备注名称 |
| 01 | 耐电弧焊接软件检测仪 | 整台 | |
| 02 | 参比电极模式 | 一个 | |
| 03 | 电极材料橡胶支座 | 设计一套 | |
| 04 | 电压缆线 | 1套 | |
| 05 | 保护接地放** | 一根 | |
| 06 | 功率毫安表 | 一个 | |
| 07 | 电脑主机测控应用 | 设计一套 | |
| 08 | 钢材拉伸试验架 | 两支 | |
| 09 | 探针的距离标准化块 | 2块 | |
| 10 | 偏角标准化块 | 2块 | |
| 11 | 瓷砖片 | 2片 | |
| 12 | 喷墨打印纸机 | 1台 | 国际品牌 |
| 13 | 折算机 | 1台 | 高端品牌 |
| 14 | 安全使用规格书书 | 1份 | |
| 15 | 适合证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 食品型號:
NDH-A 耐电弧焊接实验设计仪-微机的控制
NDH-B 耐弧光应力测试仪-触摸式屏操控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!